.HOODS of rubber/latex (also see Masks OR Gasmasks)

**alphax** · 2011-Oct-21 07:41

Really interesting hood from Kink Engineering: http://elasticaengineering.com/zenca...roducts_id=303

They've put micro holes (with a laser probably), over the nostril and mouth area so that you can breathe and even talk, yet the hood appears to be made of solid latex sheeting and appears to have no visible holes!

**Observer** · 2011-Oct-28 03:23

Originally spoken by alphax

Really interesting hood from Kink Engineering: http://elasticaengineering.com/zenca...roducts_id=303

They've put micro holes (with a laser probably), over the nostril and mouth area so that you can breathe and even talk, yet the hood appears to be made of solid latex sheeting and appears to have no visible holes!

Definitely interesting, I plan on ordering one soon... will post photos if you folks want

**Tom** · 2011-Oct-28 06:45

The hoods look a little basic, as I prefer anatomic ones. Any chance they can do a third party service? If so, then the sequencing of chlorination and lasering may be important, not to mention freight times.
Wait for them to do this with their vacuum sheets...

**dainsane1** · 2011-Oct-31 16:43

have one of the KE micro perf hoods. it worked out great. it was used for my Halloween costume over the weekend. i modded out the hood with a cyber Mohawk. the effect was great. to the outside world i was a faceless creature. KE also used it for a Warshack costume. his photos here http://kinkengineering.tumblr.com/ mine well don't have any yet im bad at that bit. will be posted to http://fictionalclothing.com/blog when i have some.

**andye** · 2011-Nov-01 06:11

Thanks for the links danesain1.BTW the character name from Watchmen is Rorschach.
Here's a link to a post from some time ago describing the mask in the graphic novel. If anyone was going to bring this character to life it would be KE.
http://www.rubberist.net/forums/show...5342#post55342

**dainsane1** · 2011-Nov-01 14:58

yep figured i fubbed the spelling; had not seen it written. Worst bit is i did a quick google search and seen the name come up so figured it would do.

**Rubberron** · 2011-Nov-02 05:51

Hi to All
Hello alphax you wrote:

Originally spoken by alphax

Really interesting hood from Kink Engineering: http://elasticaengineering.com/zenca...roducts_id=303

They've put micro holes (with a laser probably), over the nostril and mouth area so that you can breathe and even talk, yet the hood appears to be made of solid latex sheeting and appears to have no visible holes!

Micro holes nice idea, but ... I have a gauze in the breathingtube of my vacuumbed, the gauze is from a old gasmask.
The holes in the gauze are not as small as microholes and need to be cleaned after use, not just for hygienic reasons.
But also because the air flow would be reduced because the filter gets clogged even after it used only one time.

Is it wise to wear the micro hole mask for a long time /how long can this mask be worn before the air flow becomes reduced?

Would it be wise to use lube on the mask with microholes?

Rubberized Greetings
Rubberron

**tarcil** · 2011-Nov-27 14:18

Greetings

I've been lurking on these forums for over 10 years, and I finally have the ability and money to start purchasing some better gear.

Here is the dilemma : I've been tasked with purchasing a rubber/latex hood with a attachable external dildo gag. I would prefer to find one that attaches to the hood with a buckle. Not sure where to look. I would appreciate some help. Thank you.

**Tom** · 2011-Nov-27 15:33

Welcome aboard!
Google Latex System Mask for this sort of thing, I won't suggest favourites.

**alphax** · 2011-Nov-27 17:19

I would advise purchasing an external dildo gag that does not attach to the hood directly, the reason being that the attached buckles will ruin the smoothness of the hood for any other use.

Something like this: http://www.sub-shop.com/latex-double...table-gag.aspx

or even a chin dildo (I'll let you google that one)